Monday, August 30, 2010

Field Day Exchanges - Keep 'em Short and Simple.

During ham radio Field Day 2010 I noticed 8 stations on PSK31 who were using long exchange macros which are really unnecessary. This makes it a bit more difficult for the receiving stations because they can't do a simple "drag and drop" with the mouse. In most cases, I have to go into the log bar in MixW 2.19 and type in the exchange. Also, there is only so much room in the Exch. Rec'd section of the log bar.
Of course, I realize that some of the operators I encountered may have been new to ham radio and mistakes are commonly made, but I think someone at the Field Day site should have been looking over the shoulders of the operators to make sure the exchanges were sent correctly. The objective is to make as many contacts as possible within the 24-hour period. Adding this other stuff just slows things down, especially, for the receiving station. Yes, I know we are out there to have fun operating, but lets look a little bit more like we know what we are doing.
Here are some examples of the exchanges I saw:

1. "We are 7A 7A 7A 7A in MDC MDC MDC MDC". How about shortening it to 7A MDC 7A MDC? This way the receiving station can highlight the whole group of characters 7A MDC instead of picking out 7A out of one group and MDC out of another group. When I run into situations like this, I usually just type in the characters into the log bar because it is just easier.

2. "You are 59. We are 3E. We are with the (club name). The operator did not give me his section. I had to go to my Buckmaster database and find what state he was in to find his section. Furthermore, adding the club name to the exchange is more unnecessary information. The club's eQSL card has the club's name on it, hopefully. Field Day is not the time to advertise your club!

3. "599 599 2A North Carolina 2A North Carolina" can be shortened to 2A NC 2A NC. 599 is not used during Field Day and is not necessary. The receiving station again has to type 2A NC in the Exch. Rec'd section of the log bar instead of the faster "drag and drop" with the mouse.

4. Things like "my exchange is" are not needed in the Field Day exchange. We all know, or should know, that 2A is an operating class and that NC is a section. When I send my exchange, I do this: 1E IL 1E IL DE AA9UF K. I put my callsign on the end because sometimes the receiving station only gets part of my callsign at the beginning of the contact. That way he doesn't have to ask for it to be repeated.

5. Always be sure you know what your section is. One guy sent me SLA as his section. There is no SLA in the ARRL Section List. I had to once again go into my Buckmaster database and check his QTH, which was Louisiana. He sent SLA because he was in southern Louisiana, not knowing that the state was not divided up in any way like some of the other sections are.

6. One station send his callsign in brackets like this . This may have just been a mistake in configuring the macro. Macros can be confusing to write in some programs. I have experimented with a number of them to know. The brackets are not really needed and I have not seen any digital programs in which the callsign is bracketed like that. I guess the guy thought it looked cool or something.

7. Another station sent "1D No. Texas" when 1D NTX is the correct way. Sending your section the way it is written in the ARRL Section List is a big help. That way there is no confusion as to what the section is. Consistency is the name of the game here. Yes, I know that No. Texas means the same thing as NTX but it takes 5 less key strokes to type NTX.

8. Another station sent "1 Alpha Iowa". How about 1A IA instead? I don't know why these stations think they have to spell it all out when nobody else is!

In closing, keeping the exchange short and sweet can gain you and the receiving stations more QSOs and less headaches. Lets try to make next year's Field Day an even bigger success by watching what we are sending. If nobody else is sending information the way you are, chances are you are doing it wrong, so look with your eyes first.

Saturday, March 20, 2010

A Little Secret Revealed.

     I had an article published in the March 2010 issue of World Radio On-line. It is entitled "Two Seasoned Hams Help Friend In Need". My long-time friend, Bret, KB8BJA, who is disabled with severe heart problems and failed kidneys, needed somebody to put up a couple of HF antennas for him. He belongs to 3 radio clubs in Cincinnatti, OH. What World Radio edited out was this: He asked all 3 repeatedly over several months from March to August 2009. All 3 said they were "too busy". Yeah? Too busy doing what? Probably too busy playing with their own radio toys to help someone who really needs it. Besides, Bret just has a "lowly" Technician class license, so in their book, he was not "one of them". All 3 clubs should be very ashamed of themselves! They could not travel across town to help my friend but my brother and I could travel across 1-1/2 STATES to do it. We put up a Gap vertical and an Alpha-Delta DX-CC dipole in 1-1/2 days. I am sure the radio clubs appreciated us taking up their slack for them. Is it any wonder that I don't belong to any radio clubs anymore?
     Bret and I used to have a regular schedule on 80 meters CW on Sunday nights if he is feeling up to it but his health is in such decline that he can no longer do it. Sometimes his health issues make him quite exhausted and he sleeps a lot. He is very frustrated that he can no longer work at the age of 50. He is also on a waiting list for a kidney donation. If he could get that, I am sure his health and attitude would change immensely. Dialysis is his only life line right now and it has its side effects. If you have any kind of faith in God, pray for him!
     Since I wrote the above blog, Bret has lost interest in anything HF or upgrading his license.  His biggest stumbling block is the math and the fact that his memory is not so good anymore.  He has made repeated attempts at getting his General ticket.  He is 55 years old now and his health has gotten considerably worse since he was recently diagnosed with COPD and sometimes has to be on oxygen.  About the only thing he does on ham radio now is talk on the local 2 meter repeater.
     Update 9-2-18: Bret does not have an outside antenna for 2 meters or 440 so I am planning to set one up for him sometime in October this year if I get most of my Fall work done and the weather holds.  Now that I am retired, I have more time for such things.

73,

John, AA9UF



Friday, December 25, 2009

The MFJ-2990 HF Vertical Antenna

Back in late May, I installed the MFJ-2990 HF Vertical antenna in my yard. To say I am impressed would be an understatement! I am very much amazed at how well it receives and transmits! I am getting constant excellent reports on my signal on all modes. I have compared it to my Alpha-Delta DX-CC dipole and the dipole loses by quite a lot. It does do a fair job of receiving but the signal strengths are just not as large, and neither are the signal reports from the other stations.
The instructions for the antenna say that you need to put down 16 radials, but I just installed an 8 ft. ground rod next to the base and that was all. Our ground in IL has good conductivity even in the hot summertime. The base is in concrete measuring 14" wide by about 30" deep. We used 350 lb of concrete mix. The antenna will withstand winds of 40 mph without guy ropes, but I put two ropes on it to be safe. It is on the east side of the house so it is fairly protected from the SW and NW winds that get pretty strong here.
I recently added a Tokyo Hy-Power HL450B amplifier to my station. Using the MFJ-2990 with that amplifier really makes a whopping difference! I worked a guy in New Jersey on 20 meters SSB a couple of weeks ago. He had a Mosley TA-33 beam pointed away from me, and I was hitting him with an S-9 signal off the BACK of the beam! I shudder to think of what my signal report would have been if he had his beam pointed at me!
Today I worked an Australian station, VK2KM, near Sydney and got a 599 report using the PSK31 mode and 40 watts.
I would highly recommend this antenna to any ham who wants something with a small footprint, easy installation and great performance. If you have one of these antennas, I would be interested to know your opinion.

73,

John, AA9UF

An Age-old Question About DX Stations.

    If someone in the ham radio community can answer this question, please do so and send me an e-mail at the following address: aa9uf.gercken@gmail.com. I would like to know why DX stations (stations outside the U.S.) rarely engage in regular conversations on the radio. I could probably count only a handful of times when a DX station gave me more than a signal report, name and QTH before they went away. What is it they are afraid of? Big Brother listening? Saying the wrong thing? Are they so inundated with calls from other hams when they get on the air that they can't handle the pressure to respond to them all? Are they so afraid that propagation conditions are going to change and signals will fade out that they don't want to be on the air any more than necessary? What is it???
     I thought we were supposed to communicate with each other. A "Hi and bye" contact is not a QSO in my opinion. They may as well not waste their time if that is all they are going to do.  Why did they bother to spend all that money and go thru all that work of setting up a station?  Communication is the exchange of ideas and thoughts and common interests. Where is the communication in a "Hi and Bye" contact? Sometimes I don't even get the chance to tell them what kind of station equipment I am operating before the DX station signs off.
     To make matters worse, I am now seeing stateside operators doing the same thing!  Are you kidding me?  Well, I am not putting up with that nonsense.  If they call me, I have a macro that says "no hit and run contacts, please." They usually comply, but if they don't, I will not QSL them.
     I have asked the above questions in letters to the editor in World Radio and QST but nobody has any kind of answer for me. If you have some insight, please let me know.

73,

John, AA9UF

Friday, November 20, 2009

A Good Way To Advertise Ham Radio.

      If you read my blog about Ham Radio being America's best kept secret, here is a way to get the word out cheaply and have fun at the same time. You have seen these LED badges at fleamarkets, hamfests, etc., haven't you? Well, I bought one that is software programmable from batteriesamerica.com for $25. It has 10 different memories so you can program 10 different messages into it, fitting whatever occasion. The badge runs on a little coin cell battery that lasts about 2 years. It attaches to your shirt with two magnets. Hold the magnets at the spot where you want the badge and then place the badge where the magnets are and you are good to go. No pins or holes in your shirt!
      I programmed my badge with things like "Ask me about America's best kept secret....Ham Radio!" Another good one is "You never heard about Ham Radio? Ask me!" My brother and I have had more fun with these little LED badges! We go into restaurants and get curious looks and stares from a lot of people and some are even brave enough to ask us about them. Then we tell them about Ham Radio! Some have never heard of such a thing and some have, but know little about it. These little "walking billboards" get people interested and give YOU the opportunity to tell them about the best hobby in the world!
      When you wear your badge, you had better be prepared to give the people a good intelligent explanation of what Ham Radio is or you will be looked at as a dummy that doesn't know what he's talking about. Also, be prepared to have a card with your name, address, phone number and the ARRL website printed on it so you can hand it to folks who ask about Ham Radio. You never know who might call you up and ask more questions!

Tuesday, November 10, 2009

Ham Radio - America's best kept secret!

Whenever you hear the words "Ham Radio" what do you think of? A pig listening to a radio? CBers? Most people immediately think of CB, not knowing that the two are gallaxies apart in their technologies and purpose. The Citizen's Band became popular because it was a cheap way to communicate and you didn't have to know much about how it worked in order to use it. The radios were very cheaply made and had few bells and whistles. Output power was 4 to 5 watts on AM and 12 watts on SSB (Single Side Band). Most operators used AM mode which was the absolute worst mode to use. When two stations transmit on the same channel at the same time, you hear this "god-awful" squeal! SSB communication does not have that bad attribute. I often wondered why all the CBers did not change to all SSB communication when that mode became available. It would have cured a lot of headaches for everyone.
So, why is Ham Radio America's best kept secret? Because the Ham Radio community does not do enough to publicize it. You don't see commercials about it on TV or billboards about it along the highways or hear commercials about it on broadcast radio, do you? Every other product or service is plastered all over the media but not Ham Radio. I have been a self-proclaimed advertiser of Ham Radio since about 2007. We need the name "Ham Radio" to become a household name! If people just knew how versatile and useful Ham Radio is, they would throw away those stupid little cell phones. There are no dead spots when you use Ham Radio and no dropped calls. Of course, you can only talk to fellow Hams when you use the radio, but they are some of the nicest people you will ever meet! They are always ready and willing to help those in need.
Speaking of helping, who do you think helped search for survivors besides the police and firefighters during hurricane Katrina and set up temporary radio stations? Ham Radio Operators! Who helped watch the levies along the flooded Mississippi River in 1993 and looked for survivors there? Ham Radio Operators! Who helped in many untold ways during the 911 disaster? Ham Radio Operators! Did you hear about any of it on the TV news? Not likely, especially on the mainstream networks. If you did, it was most likely only a few seconds worth of video and comment. Ham Radio Operators are many times the unsung heros during these kinds of events. We have been "out there" helping for over 50 years and especially since electronic technology has made our equipment much smaller and more efficient. We aren't just a bunch of grumpy old men yakking on big radios the size of a microwave oven. We come from all walks of life and all ages and we are a huge family of nearly 700,000 operators in the U.S. There are 2.5 million operators worldwide and the numbers are growing daily! Go to this official Ham Radio website to learn more: www.arrl.org and click on Getting Started. You don't just go to a Ham Radio store and buy a radio and start transmitting. You are required by the Federal Communications Commission to pass a multiple choice, 35 question test before they will issue you a Technician Class license. You have to know what you are doing! Causing interference to other government agency communications such as fire and rescue, police frequencies and the like is very illegal and the FCC will come down on you HARD. Even if you cause problems on local ham radio repeaters, you can get slapped with a hefty fine and possibly have your equipment confiscated and your license revoked. Even jail time could happen.
I have been an active Ham Radio Operator for 30 years and I will be until my dying day. Ham Radio is kind of like being a Harley rider. It gets into your blood and becomes a lifestyle and not just a hobby. If you take away my radios, you may as well cut off my right arm!
I used to be a CBer back in the early 1970's but when the language started getting bad on the channels, I pulled the plug and got into Ham Radio in 1979. I took a class given by a group of hams in the Gibson City area and got my operating license from the FCC on May 20th that year.
Back then, the only radio modes we had were AM, SSB and CW (Morse Code), but when the personal computer made its debut, we Hams started figuring out ways to use the computer with
our radios. We have developed many digital modes in the last 25 or so years and they have become very popular. Even handicapped people are becoming Ham Radio Operators, thanks to the digital modes. You see, you don't have to hear the signal of a digital mode in order to use it. The computer does it for you. So, many deaf or hearing-impaired people can use Ham Radio!
I remember chatting with a fellow Ham in Florida a few years ago, using a mode called PSK31. He said he was a WWII veteran and had lost most of his hearing. He was about ready to give up Ham Radio because he couldn't hear much of it anymore, but when PSK31 came along, this gave him a great opportunity to keep doing it! It opened up a whole new window to the world of Ham Radio for him.
One question I get asked often is "Why are you called Hams?". Nobody knows for sure how that name stuck, but I have a theory about it. Back in the early days, the only operating mode they knew how to use was AM (Amplitude Modulation), and the only radios in existence were homemade. So, perhaps the early operators used the letters HAM to mean Homemade AM. We are also called Amateur Radio Operators because the FCC allows us to experiment with our equipment and come up with new technologies. It is because of the tinkerers and inventors in our ranks that we now have things like walkie-talkies and cell phones and even microwave ovens!
Another often asked question is "How far can you talk?". I can talk either across town or around the world, depending on which kind of Ham Radio I use. For local stuff, we use radios that operate in the 144-148 MHz and 430-450 MHz range and we use an electronic relaying device called a repeater which takes our transmitted signal and rebroadcasts it simultaneously at a higer power level. These repeaters can be on top of skyscrapers, grain elevators, mountain tops, etc. They are mostly maintained by Ham Radio clubs and there are many thousands of them scattered throughout the U.S. and the world. Some repeaters are even linked to others through the Internet. I can punch in a 4 or 5 digit code on the keypad of my VHF radio's microphone and talk to someone on a repeater in Australia from my car, for example...and it is all FREE!
The most fun for me, is operating in the 1.8 to 30 MHz range called HF (High Frequency). This is where our signals bounce all around the world and we can talk to people directly in other countries. There is a layer of atmosphere at the very edge of space called the Ionosphere. These air molecules become electrically charged by the Sun's "solar wind", which is made up of subatomic particles, x-rays and gama rays. When this happens, that layer tends to reflect certain ranges of frequencies back down to earth like a mirror. Sometimes our signals make multiple hops between the earth and Ionosphere. Check out the following website to see images of the Sun and read about the solar wind and sunspots: www.solarcycle24.com . The Sun goes through an 11-year cycle of activity. During the low point in that cycle, which we are just emerging from now, radio wave propagation conditions are very poor, so our use of some of the higher frequency bands such as 21 and 28 MHz is impossible. But when the solar cycle is at its peak, all of the HF bands become quite active! Many distant stations can be heard clearly.
In summary, there is a LOT of science involved in Ham Radio and it is an excellent source of information and learning experiences for young and old alike. When you become a Ham, the learning never stops! It keeps your brain active and keeps you young! I have talked with fellow Hams who were well into their 80's and 90's who were sharp as a tack! Many Hams get good jobs because of their knowledge of Ham Radio.